You are looking at the newest high quality 2017 Digital 3000watt Pure Sine Wave gas generator inverter. This unit is lightweight, portable, and very quiet. Our all new upgraded DG-3000 machine is the worlds most advanced inverter generator with true digital signal processing with pure sinewave output. For 2017 they made it quieter, gave it more Horsepower & improved the outer shell of the generator to where it is now easier to take off and put back on compared to last year’s model.

Digital generators are very quiet and fuel efficient compared to conventional generators. Save up to 60% on gas with our DG-3000 digital watt generator. You will get up to 5 hours running time on a tank of gas at full load and 8 hours at quarter load. Our generator has been tested with Honda and Yamaha digital generators and this unit performed the same, w/ the same fuel efficiency & the same exact quiet noise level as these 2 major brands that will cost around 2000 dollars in any store.

The generator comes with a full 3 month free part warranty. We also give all our customers a 14 day satisfaction return for refund or exchange warranty.

Specifications

Inverter Generator vs Traditional Generator

If you have used a traditional/conventional generator, you have probably experienced that when there was a fluctuation in the power, the lights dimmed and then went back to full power. This fluctuation of power is quite dangerous to many modern-day high-tech and sensitive equipment. For example, if your computer was powered by a conventional (non-inverter) generator and the voltage fluctuated, the computer would shut down prematurely. This premature shut down not only causes inconvenience, but often leads to loss of unsaved data and files. Furthermore, sudden fluctuations of power can often be fatal to many of these types of equipment. You will not experience this fluctuation of power using an inverter generator.

How it Works

An inverter generator produces 3-phase AC power at a high frequency. This high frequency AC Power is then converted to DC power. In a final step, the DC power is then inverted back to AC at 120 volts, 60hz for use by common appliances and equipment.

Intelligent Throttle Technology (Variable Speed Operation)

In contrast with the traditional generators that run at a constant RPM/speed, DG-3000 portable inverter generators are equipped with microprocessor controlled Intelligent Throttle Technology which automatically adjusts the engine speed to precisely match the load. So, if the generator is not powering many appliances, it runs at a lower engine speed. This allows the generator to run quieter while increasing fuel efficiency, increasing engine life and extending running time between refueling. Once the load is increased, this inverter generator increases the speed and RPM automatically to meet the demands of the load. The variable speed feature of the DG-3000 inverter generators provides many advantages, some of which include:

• Increased Life Span Due to Decreased Engine-Wear.
• Lighter Weight and Compact
• Fuel Efficient and Economical to Operate
• Quiet Operation
• Environmentally Friendly

Quiet Operation

DG-3000 inverter generators are much quieter than conventional generators. This is because the inverter generators do not run at full speed all the time. As mentioned, the inverter generator is controlled by a microprocessor so it only produces what is needed at any given time.

DG-3000 inverter generators are even much quieter than many other inverter generators in the market. DG-3000 inverter generators are equipped with sound dampening insulation materials that further decrease the level of noise even when running at full speed and maximum load.

The quiet operation of the DG-3000 inverter generators makes them a perfect candidate for use in RV’s, boats and at campgrounds, recreational sites, exhibition booths and concessions stands. THIS GENERATOR WILL RUN ALMOST ALL RV AC UNITS BELOW 11,000 BTU’s & THE AC UNIT MUST REQUIRE A 20amp OUTLET & NOT A 30a OUTLET. THIS UNIT HAS (2) 20a OUTLETS.

Pure Sine Wave Output

DG-3000 inverter generators produce pure (true) sine wave power, the same type and quality of AC (Alternating Current) power produced by the utility grid. Pure sine wave output is a far superior (cleaner) form of output power as compared with modified sine wave or square wave power. Increasingly, most modern electrical or electronic devices such as laptop computers, stereos, laser printers, sensitive medical equipment, digital clocks, kitchen appliance with multi-stage timers, and variable speed or rechargeable tools can only function properly with pure (true) sine wave power. Similarly, pure (true) sine wave inverter power may be needed for maximum efficiency of inductive equipment, to reduce audible and electrical noise in devices with audio-visual components and to enable proper functioning of fluorescent lights with electronic ballasts.

DG-3000 inverter generator’s pure sine wave output provides suitable power for operation of all electronic and electrical appliances and devices, whereas the inferior, conventional generators produce modified or square wave power. These conventional generators are not capable of providing suitable power to many devices. Both the function and longevity of electrical/electronic devices and appliances are improved with the use of pure sine wave power.

Portable 24″ Hyper-light, Super-Strong, Self-Lubricating Video Slider With Detachable Feet, Tension Adjustment, and Spirit Leveler

The Glide Gear DEV-1000 24″ Camera Track Slider Video Camcorder System was developed to allow anyone the ability to create Feature Film quality production shots within a reasonable budget. With aircraft grade, heavy-duty, CNC machined with tight tolerances, precision extruded industrial grade anodized aluminum construction, self-lubricating glide rails, spirit level & tension adjustment, the DEV-1000 Video Slider provides more bang for your buck than any other slider on the market in it’s price range. The DEV-1000 Video Camera Slider can be used as a stand alone unit with the detachable feet, or you can even attach it directly to your tripod. The DEV-1000 system will raise your video height approximately 2″ from the ground.

The 1000 series rail is perfect for small to mid size rigs including DSLR setups with shorter lenses.

Due to the new patented technology of the self-lubricating rails and plastic bearings, the Glide Gear Hybrid Carriage requires 4-5 times less force to move than the traditional Drylin liners and similar slider units. Indeed, the Glide Gear DEV-1000 slider, with loosened tension knob, can move with gravity as you tilt the system at an angle against the horizon, or it can be adjusted to have your exact amount of resistance. Typical roller bearing systems (as featured in competing products) use grease filled noisy metal bearings. This style of bearings are prone to being affected by dust, dirt, grit lint and moisture, which can significantly affect their performance, and limit the number of environments that they can reliably be used in. Should they become contaminated, dis-assembling/cleaning and re-adjusting them is no easy task. By comparison, the Glide Gear DEV-1000 Series Slider has an open architecture design, that uses individual, greaseless self lubricating plastic bearings and liners that can quickly and easily be swapped out if required.

Features

• 23.6″ (60cm) Long Aluminum Track
• Max Load 9kg
• Optimal Load 0-6kg
• Sets up in just a few minutes
• Self-lubricating rails and bearings
• Tension adjustment knob with locking feature
• Spirit Level on sled
• Use on a tripod or on a flat surface with included feet
• Creates Hollywood-quality production shots
• Anodized aluminum with beautiful super polish finish

Specifications

• Portable: Yes
• Optimal Camera Weight: 0-9kg
• Track Length: 23.6″ (60cm)
• Materials: Anodized Aluminum
• Compatible Thread Sizes: 1/4″ and 3/8″
• Tripod Compatible: Yes
• Swivel/Pan Head Compatible: Yes
• Spirit Level: Yes
• Dimensions (LxWxH):  23.6″ x 3.5″ x 2.7″ (60cm x 9cm x 7cm)
• Weight:  1.9 lbs (862g)

What’s in the box

• 23″ Camera Sliding Rails
• Camera Mount Platform/ Phone Adapter
• Detachable Feet X 2
• Hex Screws X 4
• 1/4″ to 3/8″ Thread Adapter
• Hex Wrench
• User Manual and Valid Warranty

Welcome to the Cadillac of steadicam systems. The Glide Gear DNA-5050 is our top-of-the-line professional model for cameras between 2 and 7 lbs. The DNA-5050 is made for the pros, and you will join the elite few that can really create free-floating motion picture shots with professional cameras anytime, anywhere.

The Amazing Secret Weapon Of Choice Of Professional Videographers, Photographers, And Hollywood Insiders.

This brilliant device will help transform shaky and amateur videos into smooth and professional level footage immediately!

Includes : Go Pro adapter, Small Camera Adapter, and Phone Adapter.

Introducing the newest innovation in camera stabilizer equipment. The GLIDE GEAR SYL-1000 allows you to take professionally smooth videos for a very reasonable price. Never again take amateur-looking footage! Get that assurance that all of your videos will turn out as smooth as silk. The SYL-1000 will capture smooth looking video even when the camera operator is in motion, even while running!

With the GLIDE GEAR SYL-1000 your camcorder will seem to float, always balanced, isolated from your hands undesirable motions. Now you are free to execute your camera moves such as panning, tilting, booming or running devoid of any camera instability or shake.

Features:

• Dimensions: 13″ x 9″ x .5″
• Weight: 14 oz – 0.9 lbs (without counterweights)
• 20 LARGE counterweight discs of 0.6 0z each
• 4 SMALL counterweight discs of 0.25 each
• Total weights ~ 14 oz
• Camera plate can slide adjust 2″
• Non-rust stainless steel aluminum parts
• No assembly required

The GLIDE GEAR SYL-1000 works for any camera up to 1.5 lbs (680 grams) and is one of the best counter balance camera stabilizers on the market. And now with the new and improved cushion handle and smooth gimbal joint for extra smooth video and comfort.

Check out the SYL-3000 for heavier rigs.

STABILIZATION WORKS THE SAME FOR BOTH MODELS: SYL-1000 and SYL-3000

Introducing the newest innovation in camera stabilizer equipment. The GLIDE GEAR SYL-3000 allows you to take professionally smooth videos for a very reasonable price. Never again take amateur-looking footage! Get that assurance that all of your videos will turn out as smooth as silk. The SYL-3000 will capture smooth looking video even when the camera operator is in motion, even while running!

Features:

• Dimensions: 13″ x 9″ x .5″

• Weight: 14 oz – 0.9 lbs (without counterweights)

• 20 LARGE counterweight discs of 0.6 0z each

• 4 SMALL counterweight discs of 0.25 each

• Total weights ~ 14 oz

• Camera plate can slide adjust 2″

• Non-rust stainless steel aluminum parts

• No assembly required

The GLIDE GEAR SYL-3000 works for any camera up to 3 lbs (1.4 kilograms) and is one of the best counter balance camera stabilizers out on the market. And it’s now available with the new and improved cushion handle and smooth gimble joint for extra smooth shooting and comfort!

Portable 24″ Hyper-light, Super-Strong, Self- Lubricating Video Slider With Detachable Feet, Tension Adjustment, and Spirit Leveler

The Glide Gear SYL-435 Slider was developed to allow anyone the ability to create Feature Film quality production shots within a reasonable budget. With aircraft grade, heavy-duty, CNC machined with tight tolerances, precision extruded industrial grade anodized aluminum construction, self-lubricating glide rails, spirit level & tension adjustment, the SYL-435 Video Slider provides more bang for your buck than any other slider on the market in it’s price range. The SYL-435 Vide Camera Slider can be used as a stand alone unit with the detachable feet, or you can even attach it directly to your tripod. The SYL-435 system will raise your video height approximately 2inches from the ground. The 435 series rail is perfect for small to mid size rigs including DSLR setups with shorter lenses.

Due to the new patented technology of the self-lubricating rails and plastic bearings, the Glide Gear SYL Hybrid Carriage requires 4-5 times less force to move than the traditional Drylin liners and similar slider units. Indeed, the Glide Gear 435 slider, with loosened tension knob, can move with gravity as you tilt the system at an angle against the horizon, or it can be adjusted to have your exact amount of resistance. Typical roller bearing systems (as featured in competing products) use grease filled noisy metal bearings. These style of bearings are prone to being affected by dust, dirt, grit lint and moisture, which can significantly affect their performance, and limit the number of environments that they can reliably be used in. Should they become contaminated, dis-assembling/cleaning and re-adjusting them is no easy task. By comparison, the Glide Gear 435 Series Slider has an open architecture design, that uses individual, greaseless self-lubricating plastic bearings and liners that can quickly and easily be swapped out if required.

Specifications:

• Length: 23.6″ (60 cm) aluminum track
• Max load: 9 kg
• Optimal load: 0-6 kg
• Swivel/Pan head compatible
• Tripod compatible
• Self-lubricating rails and bearings
• Made with anodized aluminum
• Compatible with thread sizes: 1/4″ and 3/8″
• Dimensions: 23.6″ x 3.5″ x 2.7″ (60 cm x 9 cm x 7 cm)
• Weight: 1.9 lbs (862 grams)

Features:

• Portable
• Tension adjustment knob with locking feature
• Quick and easy set-up
• Versatile: can be used with a tripod or on a flat surface with its included feet
• Spirit level on sled included
• Beautiful super polish finish anodized aluminum

What’s in the box:

• 23″ camera sliding rails
• Camera mount platform
• Detachable feet x 2
• Hex screws x 4
• 1/4″ to 3/8″ thread adapter
• Hex wrench
• User Manual and valid warranty

The SYL-960 by Glide Gear is an amazingly versatile track dolly. This unit will allow you to make world class professional films for a fraction of the price of some of the other upper end track dollys on the market. There’s no sacrificing quality with the Glide Gear SYL-960, which is machined from aircraft grade 6061 anodized aluminum alloy to very tight tolerances for maximum precision and strength. So although this system is strong enough to be used with rigs exceeding 35lbs, it is only a few lbs in weight, and folds up to be carried in the convenient carry bag that comes free as part of this kit. At the heart of the new Glide Gear SYL-960 track dolly system is the advanced sliding swivel wheel system. These wheels are not only full 360° swivel, but also able to freely slide within the wheel housing in any direction by an extra 1″. This means that the track can be as uneven as 2″ in places and still not effect the smooth operation of the Glide Gear SYL-960 track dolly.

In addition to all of these features, the Glide Gear SYL-901 is a hybrid that can easily be converted into a rolling camera dolly with the included regular swivel wheel castors. Each swivel track wheel assembly comes with four track wheels (4-wheels) for maximum stability and each castor wheel has 360° swivel and locking mechanism. These track wheels are made for movement along a track, they have the most surface area in contact with the track surface possible. Be aware that some competing products are using rollerblade wheels which are not designed to be on tracks and have less stability.

Detailed specifications:

• Folds up with carry bag for easy transportation and storage
• 4 high quality polyurethane wheels made specifically for track movement
• Wheel assembly has full 360° swivel with slider capability
• 6061 anodized aluminum alloy with stainless steel hardware
• Includes wheeled castors and wrench for conversion to tripod dolly
• Track wheel assembly has 4-wheels per assembly unit
• Heavy duty, it  can accommodate cameras up to 35lbs
• Legs can slide out to make it 5″ longer
• Comes with a full 5-year warranty

This mat is for refining drives or iron shots. This great new hitting mat allows
golfers to hit directly off the mat or use the rubber tee and can be used in
your home, driveway, or backyard. It uses the highest quality realistic
synthetic grass for real feeling golf shots and this grass will never put a mark
on your driver or iron. The weight of this mat is now almost 5lbs compared to
all other previous models that weigh 3lbs or less. This mat has also increased
in size and the new dimensions are L = 2.2′, W = 1′, Thickness is now .61″ of a
heavy duty non skid rubber with realistic synthetic grass. The rubber tee that
is included is 3.25″ tall. It is removable. These new hitting mats retail for
over $75.00 with shipping.

Stop Snoring Chin Strap – Medical Breakthrough – Snore Silencer:

Are you tired of your partner snoring?

Are you having difficulty breathing (sleep apnea) while you sleep?

Are you embarrased to slumber with friends and guests because of your snoring?

Do you have limb jerking, kicking, irritability, poor sleep, daytime fatigue?

If your answer is yes to any of the above questions then why not give the no risk 110% Snore Silencer, our stop snoring chin strap a try?

If you have been considering other devices, expensive CPAP machines, or surgery STOP  Developed for many years of comfortable use, the Sleep Silencer snore chin strap is a delightful remedy for those who snore (and their spouses!). It is The Worlds best and effective snoring chin strap. Signs and symptoms are decreased or completely eradicated beginning the very first Evening!

This light and portable product supports the chin permitting the mandible to rest with the mouth shut or virtually shut. As long as there are absolutely no obstructions blocking inhaling and exhaling via the nose, snoring is unable to easily take place. This all occurs with zero work on the part of the person (other rather than recalling to place it on!).

The Snore Silencer is effective in treating:

Snoring OBA – Obstructive Sleep Apnea Limb Jerking, punching and kicking while sleeping, Daytime fatigue, Depression, ADHD symptoms, Morning headaches, bloodshot eyes Multiple bathroom trips during sleep time, Heartburn (acid reflux), Waking up very tired, Irritability, Memory problems, Poor ability to concentrate  and Poor motor skills.

NEW with CUSTOM MOLDING INSTRUCTIONS